AcuRite 13020 Manuel d'instructions Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
11
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
Relocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
Make sure both units are placed at least 3 feet (.9
m) away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Alarm clock display
seems dark or hard to
read
Verify power adapter is plugged in.
Increase brightness using +/– buttons, located on the
back of the clock.
The optimum viewing angle for this product is from
slightly above it.
Alarm clock screen not
working
Check that the batteries are installed correctly.
Batteries may need to be replaced.
Reset the display by pressing the reset button, located
on the back of the display unit. Time and date will
need to be entered after a reset.
Inaccurate
temperature
Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 8).
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire